Terracotta clay tiles are handled using a protecting layer of obvious wax and boiled linseed-oil. Linseed oil is known as an impregnator; it’s absorbed to the surface of the clay tile and forms a water resistant seal. From staining throughout grouting the tile is also protected by the linseed-oil. Terracotta clay tile floors require to have a layer of wax and oil used.
Clean the clay tiles. When they’ve aged layers of wax, remove the wax -remover through the use of a level layer of the solvent, using a soft fabric solvent. Let the wax- . Wipe it off using a clean cloth.
Mix 1 part terra-cotta heavyduty grime remover with 10 parts water. Wet the the top of terra-cotta using a sponge dipped in the heavy duty grime remover answer. Scrub the tile for five minutes. Mop the remover up and wash the tile with water that is clear, utilizing a sponge that is fresh. Wait 24 hours for the terra-cotta tile to totally dry.
Apply an even layer of boiled linseed oil to the terra-cotta tiles, utilizing a 1 inch paint brush. Wait one hour, then wipe the tiles to eliminate the extra oil that is linseed. Wait 1-2 hours to enable the linseed oil to penetrate the terra-cotta tile area and harden as it air- .
Place a tiny bit of of terra-cotta wax on a cloth and rub it. Work in small sections. Run a brush that is gentle in circles across the waxed area of the terra-cotta tiles to buff it and make it glow.
