The Way to Alter a Bathrooom Sink Faucet

The Way to Alter a Bathrooom Sink Faucet

The Way to Alter a Bathrooom Sink Faucet

Bathroom sink faucets are available in an assortment of styles, but most typically feature among two types of valve bodies. A faucet’s valve body is single- or double-handled, and every type has slight differences in the supply line positioning. The procedure you use to change out your sink faucet varies by type, but you’ll want to eliminate the hot and cold water supply lines as well as the mounting nuts which are located beneath the sink for each.You may also need to replace your bathroom faucet due to leakage or to update the sink’s look.

Locate the faucet’s cold and hot water valves under the sink. Switch both valves in a clockwise direction to turn off the faucet’s water source.

Attach adjustable pliers into the source line connector which provides water to the faucet. Turn the connector in a counterclockwise direction to disconnect the supply line. Repeat the procedure with all the hot water line.

Inspect the surface of the sink. Locate the nuts which secure the faucet. Rotate the nuts in a counterclockwise direction to eliminate them.

Grasp the faucet and pull it up to remove it from the sink bowl. Just take the new faucet and then slide it.

Move to the base of the sink and then thread the nuts that are new on. Switch the nuts.

Wrap plumber’s tape around the threaded tip of the faucet supply lines twice. Check the tape is wrapped in precisely the exact same direction as the threads also does not feature any folds between the tape and threads that.

Reattach the cold and hot water supply lines into the connectors which protrude from the bottom. Turn each connector with the flexible pliers to ensure a tight and leak-free connection.

Turn. Check the links for any leaks and then turn the water to be certain that it’s flowing.

See related